Ragnar Robotics home

We build robot technicians

Ragnar Robotics is developing mobile robots that change their own tools and take on the repetitive work in machine shops, print farms and buildings. Ragnar M loads machines and swaps print plates. Ragnar C paints, drills and sands walls. Both run on one base, and both are designed and simulated in CAD. Next, a real arm runs the first task, and the first pilots follow.

Why one base

A fixed robot arm pays off on a machine that runs all day. A small shop has many machines that each need a little loading every hour, plus plates to swap and parts to move. So our robots drive: one robot goes to whichever machine needs it, and changes tools for the other chores.

Ragnar M and Ragnar C share that base and the same Fairino FR5 arm, with a different top for each job: a fixed riser for machines, a mast and six tools for walls. One base means one design to build, test and service, and every improvement to it reaches both robots.

See Ragnar M up close

How we work

Standard parts
Our robots are built from parts we can order: collaborative arms, grippers, hub motor wheels, LiDAR and depth cameras. A repair should be a part swap, not a trip back to us.
Failure modes first
Before building, we list the ways a robot could fail, from a dropped part to a tip over, and give each a design answer and a test.
Safety on site
Our robots are designed to pause when a person comes close. During pilots, our team stays on site.

Founder

Onat Cakici

Founder

LinkedIn

Onat leads the design of Ragnar's robots: the CAD models, the motion planning and the failure analysis. He is an aerospace engineer, with a B.S. from the Florida Institute of Technology (2025). He has built robots since he was 16: he designed competition robots with FIRST Robotics team Integra 3646, which qualified for the FIRST Championship twice, and helped build a telescoping arm that firefighters used to pull a trapped puppy from a well in Istanbul (Reuters, 2017). Before Ragnar, he led a nine engineer team that built an autonomous VTOL drone for early wildfire detection.

Onat Cakici at 16 beside the competition robot he built with Team Integra 3646, in the pit at the FIRST Championship. A telescoping pneumatic arm with a soft gripper, assembled on a workbench. Onat Cakici standing behind a white VTOL drone at a design showcase.

Cofounder wanted

We are looking for a founding robotics engineer to own the software that lets our robots see and decide.

You have put robot software on real hardware: ROS 2, perception and manipulation, ideally an arm in real use. Onat covers the hardware, the CAD and the customers. This is a cofounder role, with equity.

Email us something you built

The company

Name
Ragnar Robotics
First jobs
Loading CNC machines and swapping print plates, with Ragnar M
Robots
Ragnar M for machine shops, and Ragnar C for construction on the same base
Stage
In development: Ragnar M and Ragnar C are designed and simulated in CAD, and a real arm on the first task and the first pilots come next

Talk to us

Run a machine shop, a print farm or buildings? Help us plan the first pilots. It starts with a 15 minute call about the task you want a robot to take over: what it is, how often it comes up and what slows it down.

Book a 15 minute callhello@ragnarrobotics.com

This site sets no cookies.